Active Breezy 250 active wheelchair

Its new design with 25mm tubes offers Breezy 250 an enhanced durability and resistance. The new folding systems has no screws and no reinforcements, which translates into easy usage.

It has a wide range of models and accessories, allowing for perfect fit for the patient.

The adjustment of the weight center is simply made by changing the position of the axle bush. This allows a setting of the wheelchair that ranges between a more active and a more stable profile, or with a lower turning radius, based on the depth of the seat.

Breezy 250 has 3 backrest heights, by changing the position of the front and rear wheels.

  1.  H=50,5 cm; Rear wheel 24″ – position 1; Front wheel 8″ – position 1.
  2.  I.   H=48 cm; Rear wheel 22″ – position 1; Front wheel 6″ – position 1.
  3.  I.   H=48 cm; Rear wheel 22″ – position 2; Front wheel 6″ – position 2.

The new design of the front frame and the position of the rear wheel means a 76.5 cm length, excepting the footrests. This facilitates the access to closed/narrower areas.

 


EclipsXXL high durability wheelchair

Ultralight wheelchair for heavier users, made of aluminum, provided with double X support system and folding. EclipsXXL ensures comfort due to the anatomic shaped seat and backrest. This wheelchair has special wheels with armed rims. Transfer to the chair is easily performed due to the removable aluminum arms.

Patient’s maximum weight: 200kg.

 


EclipsX4 ultralight wheelchair

EclipsX4 is part of a new generation of completely adjustable wheelchairs. It is made of aluminum.

The seat is adjustable in 3 positions, both in height and depth.

It has ergonomic push handles adjustable in height.

The armrests can be folded to the back, removed or adjusted in height and/or length.

Users’ maximum weight: 130kg.


Eclips+ ultralight wheelchair

Eclips is the newest ultralight wheelchair. The frame is made of aluminum, which makes the wheelchair light, but also very resistant. It has a 14.8kg weight and a maximum of 130kg transportation capacity.

Easily adjustable by depth and height. The seat can be installed in different positions. The ergonomic push handles can be adjusted by height. The wheels are detachable.

Thus, you can adapt the wheelchair in accordance with your needs and will. Even the armrests can be folded to the back, removed or height adjusted.


V300 ultralight wheelchair

Standard wheelchair for temporary or permanent use and with a series of adjustment options:

4 height positions of the seat

5 depth positions of the seat

3 height position of the armrests

3 length position of the armrests

Frame colors:

,


V200 ultralight wheelchair

Standard wheelchair for temporary or permanent use and the following adjustment options:

4 height sizes of the seat

2 depth sizes of the seat

3 armrest sizes

5 seat angle positions


V100 ultralight wheelchair

Standard wheelchair for temporary or permanent usage with a series of adjustment options:

3 height sizes of the seat

2 depth sizes of the seat

3 armrest sizes


708DHEM2 hemiplegic wheelchair

Standard design for persons with hemiplegia who have the ability to use only one hand. Two metallic circles for pushing the wheelchair are attached to one of the wheels, with the option to install them on the right or left, based on requirements. The brakes are inter-connected for the purpose of stopping both wheels with one hand. The constructive design of the wheelchair increases comfort and functionality during usage. The armrests and footrest are removable.

 


708DA Amputee Wheelchair

Design with weight balancing items for persons with one or both legs amputated. It can be equipped with leg supports for those with prosthesis. Due to its constructive design, the wheelchair offers comfort and functionality during extensive usage. The armrests and footrest are removable.

 


708DS standard wheelchair

Standard wheelchair with approx. 5 cm vertically adjustable seat which allows the user to push the wheelchair with his/her feet. The wheelchair is equipped with smaller sized front and rear wheels. Due to its constructive design, the wheelchair offers comfort and functionality during extensive usage.

The armrests and footrest are detachable.


708D standard wheelchair

Made from high quality carbon steel. We offer a wide range of colors, as well as a wide range of frame sizes, enhancing the wheelchair user’s comfort degree. Our wheelchairs have a modular design, which makes it possible to adjust the wheelchair in accordance with his/her needs. The armrests and footrest are removable. Maximum weight: 120kg.

 

708d_2708d_dane


28-Double X consolidated frame wheelchair

Created for patients with higher body weight.

Comfortable and solid.

This wheelchair has a double X support system and can support up to 150 kg.

The footrests are retractable and foldable. The office type armrests (allow easy access to a table) are provided with comfortable upholstery.

The footrests are equipped with side wheels to protect the walls and furniture during movement.